Saturday, March 3, 2012
Abbagoochie Hunt Vehicle for '09: 1973 Harley Old School Chopper
Abbagoochie Hunt Vehicle for '09: 1973 Harley Old School Chopper Video Clips. Duration : 3.58 Mins.
Regretfully, I put "Bittersweet" up for sale... This was the "official" Abbagoochie Hunt vehicle for 2009. This 1973 Ironhead chopper is completely old school and not for the faint of heart. It features a rigid frame, narrow springer front end, kick start only, right side shift, no front brake and drum on the rear and 18" Ape Hangers Wheels are 40 spoke and 16" rear and 19" front. New rubber on both. There are no turn signals, horn and that kind of stuff- just the basics... The frame neck is raked at 45 degrees and it has an old school narrow springer on the front. It features the following new parts: Neck bearings Wheel bearings Chain Newly rebuilt Bendix carb Rear brake pads and linings Battery (3 months old) Known Issues: This bike needs a primary inspection hole screw and the primary drain plug should be re- tapped at some point. This chopper marks her spot, however, most of that is just a combination of the drain plug and missing screw on inspection hole when leaned on its side. This bike is a blast to ride! It starts and runs good and shifts through all gears perfectly fine. The motor has a chrome kit. The exhaust are custom bent and painted with black high temp paint. The frame is painted with expensive Martin-Seynour Chameleon 3- stage paint (Flip Flop Paint). It changes from green to purple, depending on the angle. It has several chips and scratches, so it is not show quality, but still nice. I still have the 3.5 gallon split fat bobs, painted with the same paint ...
Tags: harley davidson, kickstart, chopper, ironhead, custom, for sale
Regretfully, I put "Bittersweet" up for sale... This was the "official" Abbagoochie Hunt vehicle for 2009. This 1973 Ironhead chopper is completely old school and not for the faint of heart. It features a rigid frame, narrow springer front end, kick start only, right side shift, no front brake and drum on the rear and 18" Ape Hangers Wheels are 40 spoke and 16" rear and 19" front. New rubber on both. There are no turn signals, horn and that kind of stuff- just the basics... The frame neck is raked at 45 degrees and it has an old school narrow springer on the front. It features the following new parts: Neck bearings Wheel bearings Chain Newly rebuilt Bendix carb Rear brake pads and linings Battery (3 months old) Known Issues: This bike needs a primary inspection hole screw and the primary drain plug should be re- tapped at some point. This chopper marks her spot, however, most of that is just a combination of the drain plug and missing screw on inspection hole when leaned on its side. This bike is a blast to ride! It starts and runs good and shifts through all gears perfectly fine. The motor has a chrome kit. The exhaust are custom bent and painted with black high temp paint. The frame is painted with expensive Martin-Seynour Chameleon 3- stage paint (Flip Flop Paint). It changes from green to purple, depending on the angle. It has several chips and scratches, so it is not show quality, but still nice. I still have the 3.5 gallon split fat bobs, painted with the same paint ...
Tags: harley davidson, kickstart, chopper, ironhead, custom, for sale
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment